Plywood Waste Pellet Making Solution - Macreat (Shandong) Machinery Co., Ltd
Macreat Solution

Plywood Waste Pellet Making Solution

Plywood Waste pelleting production line,also known as sawdust pellet machine, pellet mill.

It is a machine that presses crushed trees, planks, scraps of furniture factories and other raw materials into rod-shaped particles with a diameter of 6/8/10 mm through mechanical physical extrusion.

Plywood Waste Pellet Making Solution

Process flow chart

Plywood Waste Pellet Making Solution

Supporting Subheading

Technique Introduction

Generally Speaking, Using Rice Husk To Produce Pellets Requires A Total Of Four Steps: Drying-Pelleting-Cooling-Packaging.

Crushing Section

Non-Essential Equipment
First size reduction, turning the long &crude logs into wood chips within 30-50mm (L*W). The capacity won’t be affected by the moisture content.

Crushing-Section

Pulverizing Section

Compulsory Equipment
Secondary size reduction, when the capacity is not large, as well as the logs moisture less than 45%, the wood chips from previous section will be further pulverized and grinned into sawdust, within 5-8 mm. The capacity could be strictly affected by the moisture content.

Pulverizing-Section

Drying Section

Compulsory Equipment
To produce pellets it is important to reduce the moisture into 10-15%, thus after reducing the size of all materials, they need to be dehydrated by a dryer. The capacity could be strictly affected by the moisture content.

Drying-Section

Pelleting Section

Compulsory Equipment
The full process is a complete physical change. By the spinning of the main shaft, it drives the rollers of the pellet mill to push the materials into the trumpet gaped holes of the pellet mill ring die, and the materials are firmly compressed into shape. There are no any chemical adheres are applied at all.

Pelleting-Section

The Moisture Content Of Scraps Is Less Than 15%

If moisture is higher, need to use dryer to reduce the water content before pelleting section.

pellet-mill-

Wood Chipper/Crusher LDBX218 Working Video In Our Customer’s Factory

The machine has the characteristics of large capacity, good quality, simple operation and easy maintenance.

Wood-Chipper-Crusher-LDBX218-working-video-in-our-customers-factory

Process required equipment

The production line of producing pellet with furniture scrap is composed of five sections: crushing section-pulverizing section-pelleting section-cooling section-packing section.

Coupon
WhatsApp
Messages
Email