Triple Pass Dryer - Macreat (Shandong) Machinery Co., Ltd

Triple Pass Dryer

The triple-pass dryer is composed of three layers of inner and outer cylinders. The wet material enters from one end of the inner cylinder. Inside the dryer, the inner cylinder goes from the inner cylinder to the middle cylinder, and after drying from the middle cylinder to the outer cylinder, the dry material enters from the outer cylinder. The tail was collected with a separator. The hot air enters from the inner cylinder and is discharged from the tail of the outer cylinder.

The barrel is equipped with a forward copying plate, so that the material is continuously picked up and sprinkled during the rotation of the barrel, so that it is fully contacted with the hot air flow, so as to improve the drying efficiency and make the material achieve the drying effect.

Please enable JavaScript in your browser to complete this form.

Triple Pass Dryer Features

Triple Pass Dryer Specification

ModelLDSG10LDSG20LDSG30LDSG40LDSG50LDSG60
Feed screw conveyor3 kw3 kw3 kw3 kw4 kw4 kw
Feed kiln head1 set 1 set1 set1 set1 set1 set
Dryer mainΦ2000×5840 mmΦ2300×7340 mmΦ2400×10460 mmΦ2800×10460 mmΦ2950×12420 mmΦ3300×12420 mm
Tug, bearing, shaft4 sets4 sets4 sets4 sets4 sets4 sets
Support ring, fixed support2 sets2 sets2 sets2 sets2 sets2 sets
Roller bracket2 sets2 sets2 sets2 sets2 sets2 sets
Flange, support1 sets1 sets1 sets1 sets1 sets1 sets
Speed motor4*2=8 kw5.5*2=11 kw4*4=16 kw4*4=16 kw5.5*4=22 kw5.5*4=22 kw
Discharge kiln tail1 set1 set1 set1 set1 set1 set
Initial moisture50%50%50%50%50%50%
Final moisture15%15%15%15%15%15%
Capacityy1 T/H2 T/H3 T/H4 T/H5 T/H6 T/H
Theoretical water evaporation700 kg/h1400 kg/h2100 kg/h2800 kg/h3500 kg/h4200 kg/h
Fan 15kw22kw45kw55kw75kw90kw
Cyclone2 sets2 sets2 sets2 sets2 sets2 sets
Dust collector silo1 set1 set1 set1 set1 set1 set
Air lock3*2=6 kw3*2=6 kw3*2=6 kw3*2=6 kw4*2=8 kw4*2=8 kw
Wind Pipes1 set1 set1 set1 set1 set1 set
Electric cabinet1 set1 set1 set1 set1 set1 set

Working Principle

Triple Pass Dryer

The triple-pass dryer is composed of three layers of inner and outer cylinders.

The wet material enters from one end of the inner cylinder. Inside the dryer, the inner cylinder goes from the inner cylinder to the middle cylinder, and after drying from the middle cylinder to the outer cylinder, the dry material enters from the outer cylinder.

Triple Pass Dryer

The tail was collected with a separator. The hot air enters from the inner cylinder and is discharged from the tail of the outer cylinder. The barrel is equipped with a forward copying plate, so that the material is continuously picked up and sprinkled during the rotation of the barrel, so that it is fully contacted with the hot air flow, so as to improve the drying efficiency and make the material achieve the drying effect.

Triple Pass Dryer

The advantages of two and Triple-pass Dryer: Materials suitable for drying: wood chips, bamboo chips, mushroom residues, coffee grounds, vinegar grains, distiller’s grains, eucalyptus residues, straw crushed materials, etc.

Triple-pass-dryer-energy-saving-and-more-efficient
CUSTOMER CASES

Triple-Pass Dryer, Energy Saving And More Efficient

Get In Touch !

Whatsapp

Email

Phone

Send a message

Please enable JavaScript in your browser to complete this form.
WhatsApp
Messages
Email
Coupon